=======================
N70 no signal solution (water damage)
=======================
STEP BY STEP BY PICTURES
IT'S NOT A NEW SOLUTION I JUST WORKED AND GIVEN DONE REPORT MAY BE IT WILL HELP SOMEONE TO DO THIS IT'S WORNING 100%.
WHEN YOU EXAMINE THE BOARD CAREFULLY YOU WILL FIND J7506 IS DAMAGE.AS SHOWN IN PICTURE.
SEE LCD BACK SIDE YOU WILL FIND BLACK SPOT ON THE BACK SID OF LCD.
IF J7506 IS DAMAGE YOU CAN GET IT'S TRACK FROM N7501 (VINKU) JUST REMOVE IT AND SOLDER A JUMPER WIRE LIKE PICTURE.
THE OTHER WIRE OF THIS JUMPER IS FROM SDRAM AND RAP3G SOLDER LIKE PICTURE.
NOW PLACE VINKU CAREFULLY AS YOU ARE SEEING IN PICTURE.
IF YOU PLACED THE VINKU SUCCESSFULLY YOU WILL GET FULL SIGNAL ON THE PHONE.
IF YOU LIKE THE POST DON'T FORGET TO PRES THANKS
ABDUL HAKEEM
N70 no signal solution (water damage)
=======================
STEP BY STEP BY PICTURES
IT'S NOT A NEW SOLUTION I JUST WORKED AND GIVEN DONE REPORT MAY BE IT WILL HELP SOMEONE TO DO THIS IT'S WORNING 100%.
WHEN YOU EXAMINE THE BOARD CAREFULLY YOU WILL FIND J7506 IS DAMAGE.AS SHOWN IN PICTURE.
SEE LCD BACK SIDE YOU WILL FIND BLACK SPOT ON THE BACK SID OF LCD.
IF J7506 IS DAMAGE YOU CAN GET IT'S TRACK FROM N7501 (VINKU) JUST REMOVE IT AND SOLDER A JUMPER WIRE LIKE PICTURE.
THE OTHER WIRE OF THIS JUMPER IS FROM SDRAM AND RAP3G SOLDER LIKE PICTURE.
NOW PLACE VINKU CAREFULLY AS YOU ARE SEEING IN PICTURE.
IF YOU PLACED THE VINKU SUCCESSFULLY YOU WILL GET FULL SIGNAL ON THE PHONE.
IF YOU LIKE THE POST DON'T FORGET TO PRES THANKS
ABDUL HAKEEM
No comments:
Post a Comment
We always respect your comments, Spam comments will be trashed without visible to public so please leave only relevant comments.