5 September 2015

Huawei G610-U20 Upgrading SD Card method

Hi, Here i am going to share Huawei G610-U20 upgrading via sd card. So read this post carefully and when you understand all then start doing this.

What we need to do this?

  • Huawei G610 bricked ot working phone for test.
  • Firmware file form G610-U20
  • 4 GB SD Card formatted at FAT32
  • A Computer with installed MTK 65xx Drivers and winrar or any other software that can unzip firmware file.
  • A High Quality USB Cable.
  • Huawei G610-U20 UPDATE.APP [Firmware]  file size 1.02 GB Approximately.

 How to do?


  • Make a new folder in main directory of SD Card and rename it to dload.
  • Copy UPDATE.APP to dload folder.
  • Phone battery must be over 50% charged.
  • Inser SD Card to phone and press Volum + and Volum down button then press power on and release power key when you see SD Card upgrade started on screen.





Note: I have done successfully as you have seen screenshots. Please don't cry if you bricked your phone by your mistake wrong file selection or hardware fault in phone. some time i failed because phone internal memory chip EMMC was corrupted. so do it at your own risk i am not responsible for any damage of your device.

i will also try to post other flashing method for this model so you can search more information about huawei phones in Huawei Category.

Thank you for reading you also leave comments or visit my service lab if you have any problem.

on

12 comments:

  1. aboadem6 January 2016 at 12:51

    hgdg

    ReplyDelete
  2. Unknown21 January 2016 at 22:49

    Great job brother

    ReplyDelete
  3. Unknown21 January 2016 at 22:51

    Great job brother

    ReplyDelete
  4. Unknown23 February 2016 at 09:50

    good soulation it is ok 100% thanx adman

    ReplyDelete
  5. Alamin7 April 2016 at 08:38

    Good Solution..........It is 1000% ok. Lot of thanks Brother.

    ReplyDelete
    Replies
    1. P A K F O N E S7 April 2016 at 14:07

      You Well Come dear you can also Follow by Email for more solutions.

      Delete
  6. Unknown29 September 2016 at 06:02

    not working for my huawei g610-u20, I got Brom error 6126 if I flash in sp tool

    ReplyDelete
  7. P A K F O N E S29 September 2016 at 14:10

    Better you try falsh secure_boot inside firmware. if not work try with sd card same firmware or higher.

    when you try with sd card you will get current firmware name on screen

    ReplyDelete
  8. Unknown15 March 2017 at 11:06

    good

    ReplyDelete
  9. Sab20 March 2017 at 02:16

    firmware link is broken

    ReplyDelete
  10. Unknown7 January 2018 at 11:35

    bro plzzz help Huawei G610-u20 sd card not flashing plzzz solution plzzz help

    ReplyDelete

We always respect your comments, Spam comments will be trashed without visible to public so please leave only relevant comments.