Huawei G610 have one solution for various faults. like hang on start up logo, Restarting on start up, android system has stoped, gallery has stoped etc, so the solution is firmware flashing.
firmware upgrade have three methods for this phone.
- Upgrade Huawei g610-U20 with usb cable via sp flash tool
- Upgrade Huawei g610-U20 with sd card method.
- Upgrade Huawei g610-U20 with a zip file using recovery.
USB Upgrading method for Huawei g610-U20
Download firmware Huawei G610-U20 then extract zip using zip7, winrar, win zip etc. then open extracted folder you get tools and drivers folder inside the firmware folder. exrect sp flash tool zip then open it then select Scatter file located in usb upgrade folder. phone battery must be fully charged or more then 30% after selecting scatter file press download button and connect phone to usb sp flash tool will start flashing your phone now. don't touch or remove usb cable until you see done.
Thats it you have successfully flashed huawei g610 using usb cable. if you get any error during this or failed to flash phone with usb method you should try SD Card method. i have also posted sd card method in this blog use search to find it.
Huawei G610-U20 Upgrading SD Card method
The Sd Card method is safest method for this phone but most of time we get failed due to battery low. your phone battery must be fully charged recommended. visit link below for detail of sd card method.
SD Card method
Note: This may harm your phone so use this at your own risk.
No comments:
Post a Comment
We always respect your comments, Spam comments will be trashed without visible to public so please leave only relevant comments.