How to remove pattern lock QMobile T360 [Done]

AOA friend I am going to post some very useful information about QMobile Bolt T360 formatting. I received this phone with pattern lock. so have search everywhere on internet i not found any information about this model Q Mobile T360. so i checked phone with CM2 Dongle because this have read pattern option but not work on any boot selection. then check with miracle box with some boot configuration and found SPD7731EMMC(New) boot working for this phone. its mean this have Spreadtrum  7731 CPU inside. so i done some tests you can see some screenshots and logs in this post.

Read info!

Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM29
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot17...
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM29
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot22...
  Being analyzed DATA...
  id:TBW961319_9783_V010205
  version:4.4.2
  model:T360
  brand:QMobile
  manufacturer:QMobile
  hardware:SP7731GEA_V1.0.0
  Done.

Format done without and risk.

  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM29
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot22...
  Writing DATA...
  Done.
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM29
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot22...
  Formating...
>>Format Completed!

 Note: This is a test method and working but some time we get bricked phone after format so be very careful. we are not responsible if you brick your phone by your mistake or bug in miracle box software. do at your own risk.

Good Luck!